Не выходит создать LAN segment в vmware

[chillco]

Здравствуйте. Хочу создать LAN segment в vmware, аналог internal network в virtualbox, но при подключении к виртуальной машине получаю ошибку "Could not connect 'Ethernet1' to virtual network '52 44 c0 ... 0b 36 7f'.". В vmware.log получаю эти строки:

VNET: MACVNetPortOpenDevice: Ethernet1: can't open vmnet device (No such file or directory)
VNET: MACVNetPort_Connect: Ethernet1: can't open data fd

При этом модуль vmnet запущен, как и сервис vmware-networks, в логе сервиса ошибок нет. При этом виртуальные сети, в том числе и NAT работают нормально, проблема только с LAN segment. Использую arch linux, по интернету есть примеры использования работающего LAN segment, но все они на виндовом хосте, на линуксе не видел ни одного пока. Возможно проблема именно в линуксе. Кто пользуется vmware, кто сталкивался с этой проблемой? Решили? Надеюсь на любую помощь.

 

[pr3torian]

try: sudo vmware-netcfg

 

[chillco]

try: sudo vmware-netcfg

Открывается окно Virtual Network Editor

 

[pr3torian]

Have u used NAT or Bridged?

 

[chillco]

Yes, as I said in the first post I have used NAT and it works fine

 

[pr3torian]

try this, maybe this help: sudo modprobe vmnet && sudo vmware-networks --start

 

[chillco]

try this, maybe this help: sudo modprobe vmnet && sudo vmware-networks --start

Unfortunately, it didn't

 

[pr3torian]

try to set it up again, with different linux

 

[chillco]

try to set it up again, with different linux

Thanks, it helped. I have tried to do the same on a live Kali Linux and it worked ok, without erorrs. But I don't want to use Kali as a host os, I would rather use arch linux, because I need a clean system just for running a virtual machine without any other packages installed, arch linux good at this. Maybe you know why LAN segment doesn't work on arch linux? I installed it yesterday and installed some basic packages such as linux, linux-firmware and linux-headers.

 

[pr3torian]

I really dont know, why it is not working with your Arch linux distro...(maybe try to use ArcoLinux), i hope that will help also

 

[chillco]

I really dont know, why it is not working with your Arch linux distro...(maybe try to use ArcoLinux), i hope that will help also

Thank you anyway, if it weren't for you, I wouldn't have thought that the problem might be with the distribution